Sabir Studios

http://www.fixandroid.com/ <ID:0/018> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/018> Odin engine v(ID:3.1203).. <ID:0/018> File analysis.. <ID:0/018> SetupConnection.. <ID:0/018> Initialzation.. <ID:0/018> Set PIT file.. <ID:0/018> DO NOT TURN OFF TARGET!! <ID:0/018> Get PIT for mapping.. <ID:0/018> Firmware update start.. <ID:0/018> SingleDownload. <ID:0/018> sboot.bin <ID:0/018> param.bin <ID:0/018> cm.bin <ID:0/018> boot.img <ID:0/018> recovery.img <ID:0/018> system.img <ID:0/018> userdata.img <ID:0/018> modem.bin <ID:0/018> cache.img <ID:0/018> carrier.img <ID:0/018> RQT_CLOSE !! <ID:0/018> RES OK !! <ID:0/018> Removed!! <ID:0/018> Remain Port ....  0 

http://www.fixandroid.com/ <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/018> Odin engine v(ID:3.1203).. <ID:0/018> File analysis.. <ID:0/018> SetupConnection.. <ID:0/018> Initialzation.. <ID:0/018> Set PIT file.. <ID:0/018> DO NOT TURN OFF TARGET!! <ID:0/018> Get PIT for mapping.. <ID:0/018> Firmware update start.. <ID:0/018> SingleDownload. <ID:0/018> aboot.mbn <ID:0/018> sbl1.mbn <ID:0/018> rpm.mbn <ID:0/018> tz.mbn <ID:0/018> sdi.mbn <ID:0/018> NON-HLOS.bin <ID:0/018> boot.img <ID:0/018> recovery.img <ID:0/018> system.img.ext4 <ID:0/018> userdata.img.ext4 <ID:0/018> modem.bin <ID:0/018> Transmission Complete.. <ID:0/018> Now Writing.. Please wait about 2 minutes <ID:0/018> Receive Response from boot-load

J7 6 J710F after update to nougat 7 0 touch not working solution http://www.fixandroid.com/ FIRMWARE DOWNGRADE LINK FIRMWARE LINK

MT6572__OPPO__R1001__OPPO72_13076__4.2.2__R1001_11_A.18_160323 preloader_oppo72_13076 Created by Infinity-Box (c) Chinese Miracle II (c) 2016 Device Brand   : OPPO Device Model   : OPPO72_13076 Device CPU     : MT6572 Device IntName : OPPO72_13076 Device Version : 4.2.2 Device Compile : 23/03/2016 07:09:15 � Device Project : R1001_11_A.18_160323 Device ExtInfo : R1001 http://www.fixandroid.com/ MediaTek Device Info list Created by Infinity-Box (c) Chinese Miracle II (c) 2016 Modem Version : OPPO72_hspa_13076 Localization  : en_US es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG  th_TH  pt_PT   nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR hdpi DisplayRes    : 800 x 480 Supported LCD :  HT_WVGA_13033 Supported DGT :  gt9xx_13076 Supported CAM :  s5k5cagx_yuv hi704_yuv s5k5catruely_yuv Supported BootLoader HW :  FlashID [0] CID : 90014A2058494E5948 , Name :  XINYH , Vendor : 90 , [HYNIX] FlashID [1] CID

J710KKKU1BQI1_J710KKTC1BQI1_KTC <ID:0/018> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/018> Odin engine v(ID:3.1203).. <ID:0/018> File analysis.. <ID:0/018> SetupConnection.. <ID:0/018> Initialzation.. <ID:0/018> Get PIT for mapping.. <ID:0/018> Firmware update start.. <ID:0/018> SingleDownload. <ID:0/018> sboot.bin <ID:0/018> cm.bin <ID:0/018> boot.img <ID:0/018> recovery.img <ID:0/018> system.img <ID:0/018> cache.img <ID:0/018> hidden.img <ID:0/018> modem.bin <ID:0/018> RQT_CLOSE !! <ID:0/018> RES OK !! <ID:0/018> Removed!! <ID:0/018> Remain Port ....  0  <OSM> All threads completed. (succeed 1 / failed 0)

MT6580__X-BO__S87__X-BO__6.0__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2 MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V6_P2_1_wg_n_eMMC 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 5 ] Sync... Inital Boot Ok! BB_CPU_PID : 6580 BB_CPU_NME : [MediaTek] MT6580_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer   : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x94 NAND Flash : NOT INSTALLED eMMC Flash : 70010053313030303408605A80DD2201 Initialize Memory ...  DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x70 , OEM : 0100

j320p convert to j320f fix 4g arabic http://www.fixandroid.com/ <ID:0/018> Added!! <ID:0/018> Odin engine v(ID:3.1203).. <ID:0/018> File analysis.. <ID:0/018> SetupConnection.. <ID:0/018> Initialzation.. <ID:0/018> Get PIT for mapping.. <ID:0/018> Firmware update start.. <ID:0/018> SingleDownload. <ID:0/018> aboot.mbn <ID:0/018> boot.img <ID:0/018> cache.img.ext4 <ID:0/018> hyp.mbn <ID:0/018> modem.bin <ID:0/018> NON-HLOS.bin <ID:0/018> recovery.img <ID:0/018> rpm.mbn <ID:0/018> sbl1.mbn <ID:0/018> sec.dat <ID:0/018> system.img.ext4 <ID:0/018> tz.mbn <ID:0/018> RQT_CLOSE !! <ID:0/018> RES OK !! <ID:0/018> Removed!! <ID:0/018> Remain Port ....  0  <OSM> All threads completed. (succeed 1 / failed 0) <ID:0/115> Added!! <ID:0/115> Removed!! <ID:0/115> Added!! <ID:0/115> Remove

MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V6_P2_1_wg_n preloader_yuanda6580_weg_l >>Operation:           1. Power off the phone.           2. Please insert USB cable within 40 seconds. >>  >>PreLoader USB VCOM Port (COM5) >>  >>Connecting... >>CPU TYPE:MT6580 >>Hardware version:CA00 >>Software version:0000 >>SecCfgVal :0x00000000 >>BromVersion :0xFF >>BLVersion :0x01 >>Boot downloading complete! >>EMMC_ID:0x110100303034474530011A15833D6195 >>EMMC_PRODUCT_NAME: 0x303034474530 >>EMMC_BOOT1_SIZE: 0x00200000 >>EMMC_BOOT2_SIZE: 0x00200000 >>EMMC_PRMB_SIZE: 0x00080000 >>EMMC_GP1_SIZE: 0x00000000 >>EMMC_GP2_SIZE: 0x00000000 >>EMMC_GP3_SIZE: 0x00000000 >>EMMC_GP4_SIZE: 0x00000000 >>EMMC_USER_SIZE: 0x0EC000000(3.69 G) >>  >>INT RAM: 128KB SDRAM    EXT RAM: 512MB DRAM >>Find partition success. >>backup path:C:

NOKIA 130 RM 1035 AFTER FLASH CONTACT SERVICE FIXED  SOLUTION HERE PROBLEM COMES BECAUSE OF  NOKIA 130 RM-1035 MADE BY 2 COMPANIES HMD GLOBAL  MICROSOFT IF WE FLASH WITH MICROSOFT FIRMWARE AND HARDWARE MADE BY HMD GLOBAL SO SET WILL SHOW CONACT SERVICE 1ST CHECK WHICH YOUR SET MADE BY THEN FLASH WITH THAT FIRMWARE HERE IS LINK FOR HMD GLOBAL FIRMWARE DOWNLOAD

MT6592__Hasee__Hasee_X50_TS__S7__5.0.1__ALPS.JB9.MP.V1.4 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 4 ] Sync... Inital Boot Ok! BB_CPU_PID : 6592 BB_CPU_NME : [MediaTek] MT6592_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer   : 0x0005 BLVersion : 0x00FE PreLoader : NOT Active [ Erased ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x8A NAND Flash : NOT INSTALLED eMMC Flash : 90014A4841473265040506A1BBE841DD Initialize Memory ...  DRAM configured from ScatFW! DRAM initialize passed! DRAM size : 0x80000000 DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x90 , OEM : 014A [eMMC] : FLASH_INF : [HYNIX] , e2GA [eMMC] : FL